PDA

View Full Version : Possible bug with a Marvell sata raid controler 88SE614x

Frager
10-01-2006, 02:17 PM
Hi.
Im using Daemon-tools that use the SPTD 1.29.
When Im mounting an image from a RAID0 disk on a Marvell sata raid controller , the image is not mounting and the system seem to become lest responsive/stable and there is some error in the event log about bad block on cdrom1 . If the image is mount on a raid0 on the ICH7R , no problem.

Here is my motherboard: P5WDG2-WS PRO

If you have any suggestion I’ll appreciate it
Digger
10-03-2006, 11:09 AM
We will investigate the issue.
SnorreSelmer
10-06-2006, 10:14 AM
I think I can confirm this..

I have an ASUS A8N-SLI motherboard with an onboard (Silicon Image?) RAID-controller and I can't use the latest Daemon Tools or Alcohol 120%.

The system works fine after I install the software, but as soon as I mount up an image from my RAID I get problems. Windows loads, but not properly. My first clue is that my AV software gets suck on "Loading...", then after a little while all programs I try to start kinda start, but never finish loading.

As soon as I disabled the SPTD driver from loading at boot-time in the registry everything worked fine again.

I could always use an older version of the SPTD, but that would break PerfectDisk 8 offline-defragmenting..
Frager
10-28-2006, 07:09 AM
just want to know if the developper found something about this.
Thanks
Digger
10-30-2006, 08:46 AM
Yes, please wait for next SPTD layer version to be released soon.
ChaosTheory
10-30-2006, 11:51 PM
Please check our download-section and try out our brand-new V1.35.

Report here if that fix your issues
Frager
11-03-2006, 03:19 AM
Yes it work. Every thing seems normal. Thank for the release!
SnorreSelmer
11-04-2006, 03:24 AM
Looks like this solved my problems too.. :)
Thanks a ton!
Bumbazzo
11-06-2006, 10:49 AM
... hello 4 everybody !!! :p

... is it possible that with the new SPTD 1.35 there are some problems in burning an UDF DVD with Nero 7.5.7.0 ??? :confused: ... I tried for 2 times to burn an ISO image of 4 gigs with UDF format ... but when I checked the DVD there are some damnaged sectors ....

AD MAIORA

P.S. sorry 4 my very poor english !!!! :o
Digger
11-06-2006, 02:05 PM
Try other media and/or lower write speed.
Bumbazzo
11-06-2006, 03:56 PM
@Digger:

... but this .. what means ??? ... there are really some problems ??? ... because I have always worked very well with Nero + SPTD 1.29 !!!! :(

AD MAIORA
Bumbazzo
11-06-2006, 04:44 PM
... pardon .... :p ... version 1.25 ...